British & European Machines
Gramophones & Phonographs of British or European Extraction
72 topics in this forum
-
I'm wondering if there is something I can do with this Meltrope III soundbox. It doesn't really sound much better than the exhibition on an open horn HMV machine I use. To me it looks like everything is in order, no damage to the diaphragm, the ball bearings are in place and the rubber is supple enough. Am I missing something? I expected a notable difference to a 1913 exhibition... Greatful for thoughts! H
-
-
Well, I've never even heard of the Apollo phonograph, let alone ever thought about owning one, and now, here I am with one in my my small and modest collection. I went to check out a VV-X, which I ended up purchasing, and at that time, the seller of the X wheeled out this Apollo Super 1 on a cart. He wound it, played two records, asked me if I wanted it. We came to an agreement on a package deal, and both players came home with me. The seller didn't have much information, and I'm trying to find out about it. If anyone has any info on it or suggestions where to look, please let me know. Many thanks. CHEERS!
-
- 0 replies
- 722 views
- 1 follower
-
-
Hello! I'm documenting a collection of gramophones and phonographs and I have two Phrynis and no information about the model. They are the one in the photograph and this one: https://cataleg.museumusica.bcn.cat/detall/fons_instruments/H309827/?resultsetnav=65795d6b866bd. Any information you could give me will be VERY appreciated! Thank you!!
-
- 1 reply
- 2.3k views
- 1 follower
-
-
I wonder about this machine... the horn is obviously from a cylinder phonograph, but the motor and turntable look authentic enough?
-
My problem is this arm won't move freely right to left and consequently starts skipping tracks. I wonder if anyone has any experience/advice? It appears to be undamaged. What I've tried so far is: cleaning and oiling everywhere (sewing machine oil). Moving it back and forth 500 times (true). I've lowered the arm a little bit so it doesn't press onto the ring at the top, unscrewing the little screw at the base. Nothing doing. It moves a little better when I remove the reproducer, the weight of it seems to add friction. See photos. There seems to be friction and wear at the part of the arm facing the turntable. I suppose the arrangement with the tap at the top and the …
-
It certainly looks like a (German?) HMV, with the recording angel, but those sculpted sides in metal... ? Could it have left the factory like this?
-
Well for some reason, I cannot log into TMF (it just takes me to the front page again when I click "login") so I decided to post about it here This HMV model has been on my Most Wanted list for a good long while, so I jumped for this one when I saw it on ebay! Apparently I'm told this is a first generation model? I won't know until I actually get it.
-
Does anyone know of a good place to try to sell this?
-
-
- 2 replies
- 1k views
- 1 follower
-
-
How did those machines differ from each other in term of crank horn transducer quality and size including quality
-
Please contact me if Is there any chance you have an extra tone arm support bracket like the one circled in red? It fits a few other models and I could use one. Or, know of someone that does? I have also posted in the Wanted section. Thanks, Ken Brekke
-
Hello All I´m looking for ways to clean/better this horns appearance. It´s a number 5 Spanish La Voz de su Amo, from 1911 as far as I can see. Anyway, it exactly matches the 1911 catalogue - I´ve seen several variations of the number 5, with different colour horns, wooden horns, double spring motors... This one has a single spring motor. The first picture is as found - it had all the original pieces intact except the turntable felt, the horn seemed to have been damaged recently where the metal shines through. I´ve painted those areas, matching the colour as well I could. The rest I´ve tried to clean gently using nothing but water and a tiny bit of soap. Nothing …
-
I bought this from someone in England it looks like a Columbia eagle except for the base. There is a 5 digit number on the base plate , it os on the opposite side of the governor. Any info would be greatly appreciated? It came with a slide in wood case , the case looks homemade??? see pictures Thanks Dan ps- I posted this in the acoustic machine forum and was told try this forum .
-
- 12 replies
- 4k views
- 1 follower
-
-
I’m looking for information and possible parts source for a French made cylinder machine “Le Styx”. I haven’t found much on these except pictures of them in auctions. I’m looking for a reproducer and horn. Thanks Dan
-
Is it me, or is the base cabinet on this French G&T Trademark Coin-op questionable?
-
-
- 12 replies
- 4.4k views
- 1 follower
-
-
Hey everyone. I wanted to share with everyone this mysterious phonograph. It is a French “Le graphophone” which seems to have been “heavily inspired” by something like a Columbia type N, to say the least. That being said, it was built quite well, it runs quietly with a compact motor (the crank winds backwards as it runs). The case is also lined with a thick green felt underneath the bedplate to eliminate some vibration. The decal is also quite beautiful, although it doesn’t look as bright and flashy as it likely did when it was new. there is also a hole right in the front above the decal. On the inside of the case there are 2 screw holes, and obvious signs of a …
-
The Coin-Op Zonophone has been on my wish list for many years and I was finally able to acquire this amazing example. Merry Christmas to me!! I always seem to find the perfect Christmas present for myself.
-
-
- 8 replies
- 3.9k views
- 2 followers
-
-
Hello! I'm documenting a collection of gramophones and I need help finding information about this Nirona: https://cataleg.museumusica.bcn.cat/detall/fons_instruments/H780342/?resultsetnav=657960673246e. Anyone knows which model is this? Any information you can give to me will be so much appreciated! Thank you!
-
- 6 replies
- 10.6k views
- 1 follower
-
-
Hi! I need some information about this gramophone's manufacturer, date and model. It has a round mark on one side, as you can see, but it's not readible at all. If anyone can give me some help, it will be very much appreciated! Thank you very much!
-
- 2 replies
- 9.6k views
- 2 followers
-
-
Looking for the horn pictured in this recruitment drive 1915. Realise to obtain the Mahogany screw end version maybe a challenge. Also require the elbow. Hard to find. Condition is not an issue. Somebody out there maybe able to point me In the right direction. Many Thanks :)Please email. Mark Dawson. slowpostnz@gmail.com
-
- 0 replies
- 1.4k views
- 1 follower
-
-
Can anyone tell me what this item is here? https://www.ebay.co.uk/itm/386268775707
-
Hello. I am based in London England and I have a 1920s (?) Edison cylinder machine made by J. Foster of Birkenhead. We bought it 40+ years ago in a flea market in Luxembourge along with a small handful of cylinders. It did work at teh time as I remember we played the cylinders we had. However, since then it has sat on a shelf gathering dust. I am now interested in brinigng it to life again but I need to find someone who understands how it works and who might be abel to hlep me clean it up and do whatever may be necessary. I am happy to pay someone to do this . I was wondering whether anyone on this forum might be able to help? Images atached. THank yuou - Michell…
-
Hey all New here so I dunno whether this has been covered but... Is there a name for this modified Victor 1 with pressed wood sides?
-
- 5 replies
- 2.7k views
- 2 followers
-
-
Too good not to share. Link: https://www.ebay.de/itm/195946732517
-
Not sure who got it, as the seller shamefully decided to end the auction early, but here are the pictures for posterity. It's my understanding that key parts of the coin-op mechanism were missing. Does anyone have some pictures that they can share of it?