Jump to content
Sign in to follow this  
phono-phan

Humidity levels

Recommended Posts

phono-phan

My collection is primarily on display in two showroom in my finished area of the basement. I have noticed that there are some small mold spots on some surfaces. What is the recommended humidity level for an area like this? I bought a dehumidifier and if the container was full overnight.
Any advice would be appreciated.

Share this post


Link to post
Share on other sites
Valecnik

I stumbled across this interesting paper on ideal storage conditions for various media including wax cylinders and 78s when trying to figure out optimal conditions for my wax cylinders.  I saved the link which unfortunately no longer works for me but you can try it.

http://www.keene.edu/library/OrangAsli/sound.pdf

In summary, even wax cylinders are more tolerant than I expected although ideal conditions are temperature between ~52 and 68F and humidity of 45percent. If humidity goes above 65 percent you may start having trouble.

 

For wood items it's close to the same.  temperatures between 55 - 85 °F are ideal for storing wood items. Humidity levels should be between 30 - 50% to prevent the growth of mold and wood rot.

 

Even if you have ideal humidity you need to make sure there's adequate air flow, no machines right against an outer wall or in a corner.   Condensation or wicking of water through cement can be a problem on a floor, (even carpeted) too so I would be careful about laying metal horns and such directly on the floor.

 

I'm surprised that you are having trouble with humidity.  I've seen your wonderful display and never noticed any damp or mold smell or anything like that.  It all looked well and safely displayed.

 

 

 

 

 

Share this post


Link to post
Share on other sites
phono-phan

Thanks for the information.  I don't know what has changed.  My collection  has been in the same area for over 25 years. 

Share this post


Link to post
Share on other sites
Valecnik

I stumbled across this interesting paper on ideal storage conditions for various media including wax cylinders and 78s when trying to figure out optimal conditions for my wax cylinders.  I saved the link which unfortunately no longer works for me but you can try it.

http://www.keene.edu/library/OrangAsli/sound.pdf

In summary, even wax cylinders are more tolerant than I expected although ideal conditions are temperature between ~52 and 68F and humidity of 45percent. If humidity goes above 65 percent you may start having trouble.

 

For wood items it's close to the same.  temperatures between 55 - 85 °F are ideal for storing wood items. Humidity levels should be between 30 - 50% to prevent the growth of mold and wood rot.

 

Even if you have ideal humidity you need to make sure there's adequate air flow, no machines right against an outer wall or in a corner.   Condensation or wicking of water through cement can be a problem on a floor, (even carpeted) too so I would be careful about laying metal horns and such directly on the floor.

 

I'm surprised that you are having trouble with humidity.  I've seen your wonderful display and never noticed any damp or mold smell or anything like that.  It all looked well and safely displayed.

 

 

 

 

The better dehumidifiers are so good now.  Ours here is set to 45% and I can control it with my phone via wifi.  A little air movement is key.  That should be all you need.  Maybe you need to add a fan but that should do it.

Share this post


Link to post
Share on other sites
phono-phan

Bruce,

Thanks for the post.  I need to use a hose on the dehumidifier.  It gets full overnight.  I just don't know what changed.  I have had the collection in the same location for over 25 years without this issue.  I will add a fan also to keep the air moving. 

Share this post


Link to post
Share on other sites
phonogfp

Ken, you might want to check the rain gutters & downspouts on your house.  Be sure no water is entering through a new access point.

 

Presumably, you'd know if you had a water pipe/drain leak, but how about air conditioning?  The condensation produced by a central air unit, or even a window unit, can be significant.  Be sure a window unit is not dripping down the foundation of your house, and if you have central air, be sure your drain line is clear.

 

George P.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...